For some reason, I can only remotely control a server containing FPGA (Intel Arria 10 GX FPGA). But when I use the command in Intel OpenCL for FPGA to find the driver, I cannot find the FPGA device that can be used. The command is as follows: aocl diagnose Output result: enter image description here Later, I used hardinfo to
Tag: fpga
Interrupt Handler Stops Working After Kernel Module Reload (Xilinx FPGA / PCIe)
I am currently working on a PCI driver for the Xilinx Kintex 7 board using the Xilinx PCI IP core (AXI Memory Mapped to PCIe). One problem is, that the interrupt handler stops working when I reload the kernel module. In more detail: Fresh boot of my machine Load the kernel module and monitor the kernel messages with dmesg /proc/interrupts
Linux with Altera DE2-115
I’m trying to run Linux on my Altera DE2-115 FPGA according to instructions. Obviously the first part works: Then I get problems that I don’t understand: I searched the Altera forums about it and couldn’t understand. What is it that I’m supposed to do? I’ve formatted the SD card with 3 partitions: ext3, fat and swap. Maybe the SD card