Use an IP-camera with webRTC

I want to use an IP camera with webrtc. However webrtc seems to support only webcams. So I try to convert the IP camera’s stream to a virtual webcam.

I found software like IP Camera Adapter, but they don’t work well (2-3 frames per second and delay of 2 seconds) and they work only on Windows, I prefer use Linux (if possible).

I try ffmpeg/avconv:

• firstly, I created a virtual device with v4l2loopback (the command was: sudo modprobe v4l2loopback). The virtual device is detected and can be feed with a video (.avi) with a command like: ffmpeg -re -i testsrc.avi -f v4l2 /dev/video1

• the stream from the IP camera is available with: rtsp://IP/play2.sdp for a Dlink DCS-5222L camera. This stream can be captured by ffmpeg.

My problem is to make the link between these two steps (receive the rstp stream and write it to the virtual webcam). I tried ffmpeg -re -i rtsp://192.168.1.16/play2.sdp -f video4linux2 -input_format mjpeg -i /dev/video0 but there is an error with v4l2 (v4l2 not found).

Does anyones has an idea how to use an IP camera with webRTC?

Answer

Short answer is, no. RTSP is not mentioned in the IETF standard for WebRTC and no browser currently has plans to support it. Link to Chrome discussion.

Longer answer is that if you are truly sold out on this idea, you will have to build a webrtc gateway/breaker utilizing the native WebRTC API.

1. Start a WebRTC session between you browser and your breaker
2. Grab the IP Camera feed with your gateway/breaker
3. Encrypt and push the rtp stream to your WebRTC session from your RTSP stream gathered by the breaker through the WebRTC API.

This is how others have done it and how it will have to be done.

UPDATE 7/30/2014:

I have experimented with the janus-gateway and I believe the streaming plugin does EXACTLY this as it can grab an rtp stream and push it to an webrtc peer. For RTSP, you could probably create RTSP client(possibly using a library like gstreamer), then push the RTP and RTCP from the connection to the WebRTC peer.